ENERLITES PIR Motion Occupancy Vacancy Motion Sensor Light Switch, 500W, 5A, Motion Sensor Night Light, Single-Pole, Smart LED Backlight, Neutral Not Required, Ground Required, HMOS-J-W, White

Enerlites HMOS-J In-Wall Passive Infrared Motion Sensor is the perfect cost and energy efficiency solution for both residential and commercial users, while featuring 2 in 1 Occupancy / Vacancy Sensor Mode, and SMART LED Night Light. In wall sensor is the ideal replacement of standard switch. With this occupancy sensor switch, users will never have to worry about leaving their closet, bedroom, bathroom, hallway or kitchen lights on. Easily installation for this light switch sensor without drilling - just use existing wiring. This motion detector light switch is the perfect motion sensor switch for all areas including bedroom, as LED Night Light turns off while you are sleeping and will not interrupt your resting. The motion sensor light switch includes smart LED night light functions as a switch button locator making it easy to find in the dark. The smart LED night light will only turn on when motion is detected, and will turn off once the sensor no longer detects motion. Operating modes: OCC (Occupancy) mode turns the light/fan/motor/load ON when it detects motion and will automatically turn the load OFF when no motion is detected for the pre-set time delay. VAC (Vacancy) mode converts the light switch to manual on by pressing the button, then the motion sensor switch will automatically turn the connected load OFF after no motion is detected for the pre-set time delay. Specifications: Adjustable delay time: 15 sec. – 30 min. 180 Degree, maximum 700 sq. ft. coverage. Operational Temperature: 32° - 131°F. Voltage: 120-277VAC. CFL/LED: 150W. Incandescent/Halogen: 500W. Ballast: 500VA @ 120VAC. Motor: 1/8HP. NO NEUTRAL WIRE REQUIRED, ground wire required for installation

• Motion detector light switch replaces standard switch, automatically turns connected load ON / OFF based on motion detected
• Smart LED backlight will turn on when motion is detected for easy location in the dark in vacancy mode
• Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
• Time delay options: 15 sec (Test), 15 min, 30 min. Motion sensor will turn off after the delay time is up. Single pole use only. Not for three-way wiring
• Neutral wire not required, ground wire required for installation. 120-277VAC, CFL/LED: 150W, incandescent/halogen: 500W, motor: 1/8HP. Motion sensor wall switch ranges 180 Degree, 700 sq. ft. coverage. Operating temperature (32 – 131°F). UL listed